Menü Schließen

OMNIK

OMNIK-error codes

Below you will find a list of common error messages from various brands. Not all error messages are listed here. It is advisable to also consult the manual of the device.
BrandError codeCauseAction
OmnikGround I FaultGFCI failure oversized leakage currentPlease check the DC wiring and measure. If you consider the wiring to be in order, Contact inverter service
OmnikFac FailureGrid frequency failurePlease check the AC wiring and measure. If you consider the wiring to be in order, Contact inverter service
OmnikVac FailureGrid voltage failurePlease check the AC wiring and measure. If you consider the wiring to be in order, Contact inverter service
OmnikUtility LossNo Utility&IslandPlease check the AC wiring and measure. If you consider the wiring to be in order, Contact inverter service
OmnikPV Over VoltageInput voltage too highPlease check the DC wiring and measure. If you consider the wiring to be in order, Contact inverter service
OmnikOver TemperatureTemperature abnormalCheck the inverter for heat build up or blockage of the cooler ribs and rectify as required. If this does not correct the problem, Contact inverter service
OmnikIsolation FaultIsolation failureCheck system isolation. If you consider the isolation impedance to be in order, Contact inverter service
OmnikRelay-Check FailOutput relay failureIf problem occurs repeatedly, Contact inverter service
OmnikDC INJ HighOutput DC injection too highIf problem occurs repeatedly, Contact inverter service
OmnikEEPROM R/W FailEEPROM problemIf problem occurs repeatedly, Contact inverter service
OmnikSCI FailureSerial communication interface failurePlease Contact inverter service
OmnikAC HCT FailureOutput AC sensor abnormalIf problem occurs repeatedly, Contact inverter service
OmnikGFCI FailureGFCI testing device abnormalIf problem occurs repeatedly, Contact inverter service
Omnik/W UpdatingUpdateIf problem occurs once only: wait for the regulator to be come stable again. If problem occurs repeatedly: please Contact inverter service
OmnikReconnect sReconnectThis text is displayed for information purposes only.
OmnikChecking sCheckingThis text is displayed for information purposes only.
OmnikWaitingInitialization & waitingThis text is displayed for information purposes only.

Kontaktieren Sie uns

Address

Tramstraat 7, 8560 Wevelgem

Phone

+32 (0)56 18 58 48

Email

info@wechselrichterservice.be